Unofficial Notice of Invitation to Bid (NIB)

California Department of Motor Vehicles (DMV) is seeking bids from qualified and interested contractors for the following project titled, 25-331 Telecommunications Network Cabling, Related Electrical Services, and Related Hardware Installation Services for the San Pedro DMV Field Office, identified under Solicitation ID: 25-331. Work is to be performed near A St, Los Angeles, CA, USA in Los Angeles County.

Create a Free account to view ALL details and documentsNo credit card required

General Project Description

This project entails telecommunications network cabling, related electrical services, and hardware installation for the San Pedro DMV Field Office renovation. The scope includes selective demolition of existing wiring and conduit, installation of new Category-6e data cabling (plenum and non-plenum rated) with modular jacks and patch panels, speaker cable, coaxial cable, and electrical wiring (including dedicated and Isolated Ground (IG) branch circuits and receptacles). Work involves the installation of conduits and raceways, and modifications to electrical panels, all adhering to California Electric Code (CEC), California Building Code (CBC), California Fire Code (CFC), ANSI, ASTM, IEEE, ICEA, NECA, NEMA, NFPA, and UL standards. The contractor is also responsible for installing various communication room equipment, as well as disconnecting, dismounting, and reinstalling/setting up existing or new Closed Circuit Television (CCTV) system equipment (cameras, DVR, monitors) and Wireless Access Point (WAP) devices, including associated CAT 6 cabling.

General Bid Items

Quantity: 32 Unit: ITEM Work Item: Provide, Install, Terminate, Test, And Label One Blue Colored, Plenum Rated, Category-6e Compliant Data Cable Configured 568-B (Includes All Necessary Modular Jacks, RJ45's, Module Inserts, Faceplate Frames, Surface Mount Boxes, and Other Necessary Materials). Specifications: Cable Lengths: 1' – 100'.
Quantity: 51 Unit: ITEM Work Item: Provide, Install, Terminate, Test, And Label One Blue Colored, Plenum Rated, Category-6e Compliant Data Cable Configured 568-B (Includes All Necessary Modular Jacks, RJ45's, Module Inserts, Faceplate Frames, Surface Mount Boxes, and Other Necessary Materials). Specifications: Cable Lengths: 201' – 328'.
Quantity: 5 Unit: ITEM Work Item: Provide, Install, Terminate, Test, And Label One New 20-Amp (Minimum) Dedicated, Isolated Ground, Branch Circuit and Receptacle(s). Specifications: Circuit Lengths: 1' – 125'.
Quantity: 15 Unit: ITEM Work Item: Provide, Install, Terminate, Test, And Label One New 2 Pole 20-Amp (Minimum) Dedicated, Isolated Ground, Branch Circuit Receptacle(s). Specifications: Circuit Lengths: 1' – 125'.
Quantity: 1 Unit: LS Work Item: Provide and Install Rack Bonding Jumper Kit. Specifications: 9' #6 AWG stranded copper conductor, Chatsworth Products Inc. 40159-008 (or Approved Equal).
Quantity: 1 Unit: LS Work Item: Provide And Install Package of Two Mounting Hole Ground Terminal Blocks. Specifications: Chatsworth Products Inc. 40167-001 (or Approved Equal).
Quantity: 1 Unit: LS Work Item: Provide Screws. Specifications: #12-24, 50 pack, black, 40605-005 CPI (or Approved Equal).
Quantity: 2 Unit: LS Work Item: Provide Velcro. Specifications: ½" x 25 Yd, Black, Self-Gripping, 189755 Velcro (or Approved Equal).
Quantity: 1 Unit: LS Work Item: Provide Panduit Cat6 Blue Data Jacks. Specifications: CJ688TGBU (or Approved Equal).
Quantity: 10 Unit: LS Work Item: Provide Panduit Cat6 Orange Data Jacks. Specifications: CJ688TGOR (or Approved Equal).
Quantity: 10 Unit: LS Work Item: Provide 24-Port All Metal Modular Patch Panel with Support Bar (Black). Specifications: Panduit CP24WSBL (or Approved Equal).
Quantity: 150 Unit: LS Work Item: Cat6 Copper Patch Cord. Specifications: 1ft UTP28SP1BU.
Quantity: 20 Unit: LS Work Item: Cat6 Patch Cord. Specifications: 2ft UTP28SP2BU.
Quantity: 10 Unit: LS Work Item: Cat6 Patch Cord. Specifications: 3ft UTP28SP3BU.
Quantity: 10 Unit: LS Work Item: Cat6 Patch Cord. Specifications: 5ft UTP28SP5BU.
Quantity: 100 Unit: LS Work Item: Cat6 Patch Cord. Specifications: 7ft UTP28SP7BU.
Quantity: 10 Unit: LS Work Item: Cat6 Patch Cord. Specifications: 3ft UTP28SP3OR.
Quantity: 2 Unit: LS Work Item: Provide And Install 8" One-Piece Latching Surface PVC Single-Channel Low Voltage Raceway (White). Specifications: Panduit LD10IW8-A (or Approved Equal).
Quantity: 12 Unit: LS Work Item: Provide and Install Legrand Wiremold Abandon Plates or similar. Specifications: 1043S 525 Series (or Approved Equal).
Quantity: 1 Unit: LS Work Item: Provide and Install Chatsworth Filler Panel. Specifications: 30025-E01 (or Approved Equal).
Quantity: 1 Unit: LS Work Item: Provide and Install Panduit Horizontal Flat Rack Filler Panel. Specifications: DPFP1 (or Approved Equal).
Quantity: 1 Unit: ITEM Work Item: Provide and install one 1" conduit from MPOE to Communications room.
Quantity: 1 Unit: ITEM Work Item: Provide & install one 1” hard plastic corrugated inner duct w 3/8" minimum poly pulls line (continuous) from MPOE to Comm Room wall. Specifications: Leave 3' of line at each end. Inner duct must be secured every 3'. Label for Ethernet Fiber.
Quantity: 1 Unit: ITEM Work Item: Provide & install one 2" conduit from MPOE to Comm Room. Specifications: Terminate 2 voice drops into existing 66block.
Quantity: 1 Unit: ITEM Work Item: Provide & install one dedicated 20 amp 5-20R receptacle onto the wall behind data rack.
Quantity: 1 Unit: ITEM Work Item: Remove 4 Post Rack and re-install the same 4 Post Rack within Communications room. Specifications: Work includes related task to properly re-install the rack.
Quantity: 133 Unit: HOUR Work Item: Cost Per Hour to Identify, Provide, Establish and Install Low Voltage Cabling System or Pathways, includes installing power poles, data racks, anything related to delivery of data cabling/fiber.
Quantity: 120 Unit: HOUR Work Item: Cost per hour to identify, establish, provide and install electrical conduit pathways and conductor wiring and electrical panels, transformer related work per DGS Specifications and Electrical Diagrams.
Quantity: 70 Unit: HOUR Work Item: Cost Per Hour to Remove and Dispose of Existing low voltage cabling, electrical conductor wiring, conduit and the installing of abandon plates per DGS Specifications and Electrical Diagrams.
Quantity: 10 Unit: HOUR Work Item: Cost Per Hour for Core Boring for Access to Walker - Duct Systems, Includes Providing & Installing Monuments per DGS Plans or request by DMV Project Manager.

NAICS Classification

NAICS 238210 – Electrical Contractors and Other Wiring Installation Contractors (Installation of telecommunications network cabling, electrical power and control wiring, conduits, raceways, electrical panels, CCTV systems, and WAP devices.), NAICS 238290 – Other Building Equipment Contractors (Installation of communication room equipment, speaker systems, and mounting hardware for monitors/TVs.), NAICS 541519 – Other Computer Related Services (Installation and setup of CCTV system equipment and WAP devices, and configuration of network components.)

Records and Due Date

This bid opportunity was entered into BidAmerica on February 20, 2026, and was last updated on February 20, 2026. All bids and/or proposals are due on March 4, 2026.

Contractors may log in or create a free BidAmerica account to view full project documents, plans, specifications, addenda, submission requirements, and more project details issued by California Department of Motor Vehicles (DMV).

Legal Disclaimer

All bidders are responsible for reviewing and verifying all official bid documentation directly from the issuing agency. BidAmerica aggregates public bid information for advertisement purposes for contractors and government agencies convenience. This Notice of Invitation to Bid is for reference purposes only and is not an official or complete representation of any documents issued by California Department of Motor Vehicles (DMV). BidAmerica does not guarantee the accuracy, completeness, or timeliness of any information displayed and shall not be held liable for any errors, omissions, misinterpretations, or damages resulting from reliance on this summary. Contractors must obtain all official information—including plans, specifications, addenda, deadlines, submission requirements, qualifications, and bidding conditions—directly from California Department of Motor Vehicles (DMV) prior to bidding.