Loading...
Unofficial Notice of Invitation to Bid (NIB)
Ontario International Airport is seeking bids from qualified and interested contractors for the following project titled, RECONSTRUCT RUNWAY 8L –26R, TAXIWAY N AND CONNECTOR TAXIWAYS EAST OF TAXIWAY U PROJECT, identified under Solicitation ID: 2026-IFB-076. Work is to be performed near 1923 E Avion St, Ontario, CA 91761, USA in San Bernardino County.
General Project Description
This project involves the full depth reconstruction of Runway 8L-26R keel (East of Taxiway U, 1,100 feet of the south outboard pavement), the full runway width at the intersection of Taxiway U, Taxiway V, and Taxiway W. The scope also includes full depth reconstruction of Taxiway N (East of Taxiway U), rehabilitation of runway shoulders, taxiway shoulders, paved infield areas, and Runway 26R blast pad, and replacement of associated runway and taxiway pavement and edge lighting and storm drainage work. It is part of the OIAA Capital Improvement Program (CIP) to modernize infrastructure, enhance safety, and improve operational efficiency.
General Bid Items
- Quantity: - Unit: - Work Item: Contractor Quality Control Program (CQCP)
- Quantity: - Unit: - Work Item: Temporary Air and Water Pollution, Soil Erosion, and Siltation Control
- Quantity: - Unit: - Work Item: Mobilization
- Quantity: - Unit: - Work Item: Method of Estimating Percentage of Material Within Specification Limits (PWL)
- Quantity: - Unit: - Work Item: Preparation/Removal of Existing Pavements
- Quantity: - Unit: - Work Item: Clearing and Grubbing
- Quantity: - Unit: - Work Item: Excavation, Subgrade, and Embankment
- Quantity: - Unit: - Work Item: Controlled Low-Strength Material (CLSM)
- Quantity: - Unit: - Work Item: Recycled Concrete Aggregate Base Course
- Quantity: - Unit: - Work Item: Cement Treated Soil Base Course
- Quantity: - Unit: - Work Item: Asphalt Mix Pavement
- Quantity: - Unit: - Work Item: Cement Concrete Pavement
- Quantity: - Unit: - Work Item: Rigid Pavement Repair
- Quantity: - Unit: - Work Item: Emulsified Asphalt Prime Coat
- Quantity: - Unit: - Work Item: Emulsified Asphalt Tack Coat
- Quantity: - Unit: - Work Item: Joint Sealants for Pavements
- Quantity: - Unit: - Work Item: Adhesive Compounds, Two-Component for Sealing Wire and Lights in Pavement
- Quantity: - Unit: - Work Item: Concrete for Miscellaneous Structures
- Quantity: - Unit: - Work Item: Runway and Taxiway Markings
- Quantity: - Unit: - Work Item: Saw-Cut Grooves
- Quantity: - Unit: - Work Item: Seeding
- Quantity: - Unit: - Work Item: Pipe for Storm Drains and Culverts
- Quantity: - Unit: - Work Item: Manholes, Catch Basins, Inlets and Inspection Holes
- Quantity: - Unit: - Work Item: Airfield Electrical General and Testing Requirements
- Quantity: - Unit: - Work Item: Underground Power Cable for Airports
- Quantity: - Unit: - Work Item: Airport Transformer Vault and Vault Equipment
- Quantity: - Unit: - Work Item: Airport Underground Electrical Duct Banks and Conduits
- Quantity: - Unit: - Work Item: Electrical Manholes and Junction Structures
- Quantity: - Unit: - Work Item: Installation of Airport Lighting Systems
- Quantity: - Unit: - Work Item: Demolition and Removal of Airfield Electrical Items, Temporary Airfield Electrical Work, and Miscellaneous Electrical Items
- Quantity: LS Unit: LS Work Item: DEMOLITION AND REMOVAL OF ELECTRICAL ITEMS
- Quantity: LS Unit: LS Work Item: TEMPORARY ELECTRICAL WORK
- Quantity: LS Unit: LS Work Item: MISCELLANEOUS ELECTRICAL WORK
- Quantity: LF Unit: LF Work Item: EXISTING CONDUIT REPAIR AND OR HEAVY DUTY CONDUIT CLEANING
- Quantity: LF Unit: LF Work Item: Furnish and Install 18” Diameter HDPE Pipe with bedding per Manufacturer’s recommendations
- Quantity: LF Unit: LF Work Item: Furnish and Install Dual 60” Diameter Dual Wall Perforated Polypropylene (PP) Pipe System
- Quantity: Each Unit: EACH Work Item: Furnish and Install 60” Diameter Welded End Plate per Manufacturer’s recommendations
- Quantity: Each Unit: EACH Work Item: Furnish and Install 90 Degree 60” Polypropylene fitting and CLSM backfill
- Quantity: LF Unit: LF Work Item: Furnish and Install Single 60” Diameter Dual Wall Perforated Polypropylene (PP) Pipe System
- Quantity: Each Unit: EACH Work Item: Furnish and Construct Aircraft Load Rated Storm Drain Manhole
- Quantity: Each Unit: EACH Work Item: Furnish and Construct Aircraft Load Rated Storm Drain Inlet
- Quantity: Each Unit: EACH Work Item: Furnish and Construct Concrete Weir Structure, pipe connection, and
- Quantity: Each Unit: EACH Work Item: FURNISH AND INSTALL 4’X4’X4’ AIRCRAFT RATED HANDHOLE
- Quantity: SY Unit: SY Work Item: Construct 12” Cement treated soil base course
- Quantity: Ton Unit: TON Work Item: Provide Cement for 12” Cement Treated Base Course (8%)
- Quantity: SY Unit: SY Work Item: Place 6” of Recycled Concrete Aggregate Base Course from Stockpile Material (Owner Furnished at stockpiled location)
- Quantity: LF Unit: LF Work Item: Crack Repair existing PCC slab
- Quantity: SF Unit: SF Work Item: Spall repair of existing PCC slabs
- Quantity: Each Unit: EACH Work Item: REMOVE AND REINSTALL L-850A(L) INPAVEMENT RUNWAY CENTERLINE LIGHT AND TRANSFORMER
- Quantity: Each Unit: EACH Work Item: REMOVE AND REINSTALL L-850B(L) RUNWAY TOUCHDOWN ZONE LIGHT AND TRANSFORMER
- Quantity: Each Unit: EACH Work Item: FURNISH AND INSTALL L-850C(L) INPAVEMENT RUNWAY EDGE LIGHT AND TRANSFORMER
- Quantity: Each Unit: EACH Work Item: FURNISH AND INSTALL L-862/E(L) ELEVATED RUNWAY EDGE LIGHT AND TRANSFORMER
- Quantity: Each Unit: EACH Work Item: FURNISH AND INSTALL L-852G(L) INPAVEMENT RUNWAY GUARD LIGHT (IRGL) AND TRANSFORMER
- Quantity: Each Unit: EACH Work Item: FURNISH AND INSTALL L-804(L) ELEVATED RUNWAY GUARD LIGHT (ERGL) AND TRANSFORMER
- Quantity: Each Unit: EACH Work Item: FURNISH AND INSTALL L-852C(L) INPAVEMENT BI-DIRECTIONAL LIGHT AND TRANSFORMER
- Quantity: Each Unit: EACH Work Item: FURNISH AND INSTALL L-861T(L) ELEVATED TAXIWAY EDGE LIGHT AND TRANSFORMER
- Quantity: Each Unit: EACH Work Item: FURNISH AND INSTALL L-868B BASE CAN IN NEW CONCRETE PAVEMENT
- Quantity: Each Unit: EACH Work Item: FURNISH AND INSTALL L-868B EXTENSION IN NEW CONCRETE PAVEMENT
- Quantity: Each Unit: EACH Work Item: FURNISH AND INSTALL -868B SPACER PACKAGE
- Quantity: Each Unit: EACH Work Item: FURNISH AND INSTALL L-867B BASE CAN IN NEW ASPHALT PAVEMENT
- Quantity: Each Unit: EACH Work Item: FURNISH AND INSTALL L-867B COVER PLATE
- Quantity: Each Unit: EACH Work Item: FURNISH AND INSTALL AIRFIELD GUIDANCE SIGN - ONE MODULE - ON NEW FOUNDATION
- Quantity: Each Unit: EACH Work Item: FURNISH AND INSTALL AIRFIELD GUIDANCE SIGN - TWO MODULE - ON NEW FOUNDATION
- Quantity: Each Unit: EACH Work Item: FURNISH AND INSTALL AIRFIELD GUIDANCE SIGN - THREE MODULE - ON NEW FOUNDATION
- Quantity: Each Unit: EACH Work Item: FURNISH AND INSTALL AIRFIELD GUIDANCE SIGN - FOUR MODULE - ON NEW FOUNDATION
- Quantity: Each Unit: EACH Work Item: FURNISH AND INSTALL RETROREFLECTOVE AIRFIELD GUIDANCE SIGN - ANY SIZE - ON NEW FOUNDATION
- Quantity: Each Unit: EACH Work Item: NEW ISOLATION TRANSFORMER IN EXISTING GUIDANCE SIGN
- Quantity: LS Unit: LS Work Item: FURNISH AND INSTALL NEW 20KW CC R
- Quantity: LF Unit: LF Work Item: FURNISH AND INSTALL NEW CONCRETE ENCASED 1W-2"C PVC SCH 40 CONDUIT IN EXISTING ASPHALT PAVEMENT
- Quantity: LF Unit: LF Work Item: FURNISH AND INSTALL NEW CONCRETE ENCASED 4W-4"C PVC SCH 40 CONDUIT IN NEW ASPHALT OR CONCRETE PAVEMENT
- Quantity: LF Unit: LF Work Item: FURNISH AND INSTALL NEW CONCRETE ENCASED 4W-4"C PVC SCH 40 CONDUIT IN NON PAVED EARTH
- Quantity: SY Unit: SY Work Item: Grooving
NAICS Classification
NAICS 237310 – Highway, Street, and Bridge Construction, NAICS 238210 – Electrical Contractors and Other Wiring Installation Contractors, NAICS 237990 – Other Heavy and Civil Engineering Construction, NAICS 238910 – Site Preparation Contractors, NAICS 238110 – Poured Concrete Foundation and Structure Contractors, NAICS 561730 – Landscaping Services
Records and Due Date
This bid opportunity was entered into BidAmerica on February 7, 2026, and was last updated on March 3, 2026. All bids and/or proposals are due on March 20, 2026.
Contractors may log in or create a free BidAmerica account to view full project documents, plans, specifications, addenda, submission requirements, and more project details issued by Ontario International Airport.
Legal Disclaimer
All bidders are responsible for reviewing and verifying all official bid documentation directly from the issuing agency. BidAmerica aggregates public bid information for advertisement purposes for contractors and government agencies convenience. This Notice of Invitation to Bid is for reference purposes only and is not an official or complete representation of any documents issued by Ontario International Airport. BidAmerica does not guarantee the accuracy, completeness, or timeliness of any information displayed and shall not be held liable for any errors, omissions, misinterpretations, or damages resulting from reliance on this summary. Contractors must obtain all official information—including plans, specifications, addenda, deadlines, submission requirements, qualifications, and bidding conditions—directly from Ontario International Airport prior to bidding.