Unofficial Notice of Invitation to Bid (NIB)

Sacramento Regional Transit District is seeking bids from qualified and interested contractors for the following project titled, REPAIR OF RELAY CASE (26TH AND R STREETS), identified under Solicitation ID: 2025042. Work is to be performed near 26th St & R St, Sacramento, CA 95816, USA in Sacramento County.

Create a Free account to view ALL details and documentsNo credit card required

General Project Description

This project involves the repair of a damaged steel relay case located at the southeast quadrant of 26th and R Streets in Sacramento, California. The scope of work includes cutting out the damaged side panel, fabricating and installing a new side panel and hinge mount, installing owner-furnished exterior doors, and priming and painting the newly-repaired areas to match the existing relay case. The contractor is responsible for providing all labor, materials (except owner-furnished steel doors), equipment, and tools, while adhering to technical specifications for surface preparation, coating application, and quality control. The work must be completed to restore the relay case to like-original measurements and fitment.

General Bid Items

Quantity: - Unit: - Work Item: Provide all labor, material, equipment, and tools to repair the damaged relay case.
Quantity: - Unit: - Work Item: Cutting out the damaged steel side panel.
Quantity: - Unit: - Work Item: Fabricating a new steel side panel.
Quantity: - Unit: - Work Item: Installing the new steel side panel and hinge mount.
Quantity: - Unit: - Work Item: Installing owner-furnished replacement steel case doors.
Quantity: - Unit: - Work Item: Providing door hinges and straightening.
Quantity: - Unit: - Work Item: Priming the newly-repaired area.
Quantity: - Unit: - Work Item: Painting the newly-repaired area to match the existing relay case. Specifications: Coatings: Multiple component epoxy and urethane coatings. 1st Coat: Epoxy (PPG Amercoat Amerlock 2, two-component, high solids epoxy coating). 2nd Coat: PPG Omni LV MTX 2.8 VOC Single Stage or approved equal. 3rd Coat: Same as 2nd coat. Color: PPG Paints color PPG0993-5. Sheen: Semi-gloss finish per ASTM D523 reflectance (45-75). Application DFT: Minimum 10 Mils total DFT (Amerlock 2 Epoxy: 4-8 mils DFT; Polysiloxane: 3-7 mils DFT per coat). Surface Preparation: Pre-application cleaning with PPG PREP 88, scrubbing, flushing, neutralization (7.5 PH Maximum), and thorough drying. Removal of failing coatings and abrasion by hand or power tools (SSPC-SP2 or SP3) to achieve 4B adhesion rating (ASTM D3359). Application: Uniform spray or roller application, free of defects, with appropriate cure times between coats.
Quantity: - Unit: - Work Item: Securing the construction area.
Quantity: - Unit: - Work Item: Thorougly cleaning all work areas after completion.

NAICS Classification

NAICS 238190 – Other Foundation, Structure, and Building Exterior Contractors, NAICS 238320 – Painting and Wall Covering Contractors

Records and Due Date

This bid opportunity was entered into BidAmerica on January 26, 2026, and was last updated on January 26, 2026. All bids and/or proposals are due on February 2, 2026.

Contractors may log in or create a free BidAmerica account to view full project documents, plans, specifications, addenda, submission requirements, and more project details issued by Sacramento Regional Transit District.

Legal Disclaimer

All bidders are responsible for reviewing and verifying all official bid documentation directly from the issuing agency. BidAmerica aggregates public bid information for advertisement purposes for contractors and government agencies convenience. This Notice of Invitation to Bid is for reference purposes only and is not an official or complete representation of any documents issued by Sacramento Regional Transit District. BidAmerica does not guarantee the accuracy, completeness, or timeliness of any information displayed and shall not be held liable for any errors, omissions, misinterpretations, or damages resulting from reliance on this summary. Contractors must obtain all official information—including plans, specifications, addenda, deadlines, submission requirements, qualifications, and bidding conditions—directly from Sacramento Regional Transit District prior to bidding.